How To Make Replacement Sling For Patio Chair

Are your patio chair slings looking worn out or torn? It’s time to replace them! Making a replacement sling for your patio chair is not as difficult as you might think. With the right materials and tools, you can create a new sling that will not only look great but also provide safety and comfort when sitting in your outdoor space.

In this article, we’ll guide you through the process of making a replacement sling for your patio chair. You will learn how to:

  • Remove the old sling
  • Choose the right material
  • Sew the new sling
  • Install it correctly
  • Maintain it so that it lasts for years to come.

By following these steps carefully, you can ensure that your patio chairs are safe and comfortable for all who use them. So let’s get started!

Remove the Old Sling

Now you’re going to need to take off the old fabric, but don’t worry, it’s not too difficult.

First, gather your removing tools including a flathead screwdriver and pliers. Start by removing any screws or bolts that are holding the sling in place. Then, carefully use the flathead screwdriver to pop out any plastic caps covering the end of the rails.

Dispose of the old sling properly to prevent any accidents or harm to others. You can cut it into smaller pieces before throwing it away so that no one can accidentally get caught on it.

Additionally, make sure that all tools used are safely stored away from children and pets once you’re done with them.

Preventing common mistakes and taking safety precautions is vital during this process. Be cautious when using sharp tools such as scissors or knives when cutting off any excess fabric from the chair frame. Make sure you wear protective gloves and goggles while working with these tools to avoid accidental injuries. Remember, safety comes first!

Now that you’ve removed the old sling safely and securely disposed of it, it’s time for step two – choosing the right material for your new patio chair sling replacement.

Choose the Right Material

You’ll want to select the proper fabric that will hold up well in outdoor conditions and provide comfort for your seating needs.

There are several materials available on the market, but not all of them are suitable for patio chairs.

The two most popular choices for sling fabrics are vinyl-coated polyester mesh and acrylic canvas.

Comparing these materials, vinyl-coated polyester mesh is more affordable than acrylic canvas.

Vinyl-coated polyester mesh is also easier to clean and maintain as it doesn’t absorb water or stains easily.

However, it may not be as comfortable as acrylic canvas because it has less give when you sit on it.

On the other hand, acrylic canvas is more expensive than vinyl-coated polyester mesh, but it provides better durability and comfort in the long run.

It also comes in a wider range of colors and patterns, which makes it an ideal choice if you want to add some style to your patio chair.

Ultimately, the choice between these two materials will depend on your budget and personal preference.

Once you’ve chosen the right material for your replacement sling, you’re ready to move onto the next step – sewing the new sling into place!

Sew the New Sling

To start your project, you can choose to use a sewing machine or hand sewing.

Next, create the sling pocket by measuring and cutting your fabric to size.

Finally, attach the sling clips to secure the new sling in place on your patio chair.

Use a Sewing Machine or Hand Sewing

Sewing a new sling can be easily accomplished with either a sewing machine or hand stitching, giving you the opportunity to customize your outdoor furniture. Here are some pros and cons of each method:

  • Hand Sewing:

  • Pros: You have more control over the stitching, making it easier to make adjustments as you go. Also, it’s a great option if you don’t have access to a sewing machine.

  • Cons: It can be time-consuming and labor-intensive. Plus, if you’re not experienced in hand sewing, it may take longer for you to get the hang of it.

  • Machine Sewing:

  • Pros: It’s faster than hand sewing and produces consistent results. Additionally, if you already own a sewing machine, using it will save you money on purchasing supplies for hand stitching.

  • Cons: If your machine is not equipped to handle heavy-duty fabrics like those used for patio chair slings, then there’s a chance that the stitches won’t hold up over time.

Once you’ve decided which method works best for your needs, move on to creating the sling pocket.

Create the Sling Pocket

Now it’s time to get creative and start crafting the perfect pocket for your outdoor seat. Begin by measuring your fabric to ensure that it’s the right size for your chair frame. You can use a tape measure or ruler to get accurate measurements of both length and width.

Once you have your fabric dimensions, choose colors that match or complement the existing design of your patio furniture. Next, create the sling pocket by folding over each edge of the fabric and sewing it in place. Make sure to leave enough space at the top of the pocket for the sling clips to attach securely.

If you’re using a sewing machine, set it on a zigzag stitch to ensure durability. Alternatively, sew by hand with thick thread and a strong needle if you prefer a more traditional approach. With this step completed, you’re now ready to move onto attaching the sling clips!

Attach the Sling Clips

You’ll need to attach the clips securely to ensure that your pocket stays in place as you lounge outdoors. There are two types of clips commonly used for patio chair slings – sling rail end clips and sling swivel rocker clips. Whichever type you choose, make sure that they fit snugly on both the fabric and frame of your chair.

When attaching the clips, there are a few troubleshooting tips to keep in mind. Double-check that the pocket is pulled taut across the frame before securing the clips, and make sure that both sides of the sling are even. If one side is longer than the other, it will cause an uneven distribution of weight and may lead to tears or damage over time.

Once your pockets are secured with sturdy clips, you’re ready to move onto installing your new sling!

Install the New Sling

First, align the new sling with the chair frame by placing it on top and making sure it’s centered.

Then, attach the sling clips to the frame by sliding them into place and tightening them with a screwdriver.

Repeat this process for each clip until they’re all securely attached.

Align the Sling with the Chair Frame

Take a moment to ensure that the sling is perfectly lined up with the frame of your beloved outdoor lounger. This step is crucial in making sure that your replacement sling fits well and stays in place for years to come.

To achieve proper alignment, it’s recommended to have someone help you hold the sling while aligning it with the chair frame. Tips for proper alignment include measuring and marking where the old sling was attached before removing it, ensuring that both sides of the sling are even with each other, and double-checking that the fabric is stretched tightly across the chair frame.

Common mistakes to avoid include rushing through this step or assuming that eyeballing will suffice. Taking extra time to get the alignment right will save you from headaches down the road when using your newly refurbished patio chair.

Now that you’ve aligned your new sling with precision, it’s time to attach it securely to your chair frame by following our next steps on how to make a replacement sling for patio chairs: ‘Attach The Sling Clips To The Frame’.

Attach the Sling Clips to the Frame

Now that you’ve aligned the sling with the chair frame, it’s time to attach the sling clips.

There are different types of sling clips available, but most chairs use either a U-shaped or J-shaped clip. Whichever type of clip your chair has, make sure they’re positioned correctly and securely attached to prevent any accidents from happening.

Tips for proper clip placement include making sure that the clips aren’t too close together as they may cause stress on the fabric and tear over time. Additionally, ensure that each clip is secured tightly around the frame so that it doesn’t slip or fall off during use.

With these tips in mind, go ahead and attach each clip one at a time until all four corners of the new sling are securely fastened to your chair frame.

As important as it is to properly install your new patio chair sling, it’s equally crucial to maintain it well.

In our next section about care and maintenance of the new sling, we’ll discuss some easy steps you can take to keep your newly replaced patio chair looking great for years to come.

Care and Maintenance of the New Sling

Remember to regularly clean and inspect the new sling to ensure it’s in good condition for use. Here are some cleaning tips to make sure your replacement sling lasts longer:

  • Avoid using harsh chemicals or bleach on the fabric as this can cause discoloration or damage.
  • Use a mild soap solution with warm water to gently clean the fabric. Rinse thoroughly and let it air dry completely before using.

To prevent weather damage, cover or store the patio chair during extreme weather conditions such as heavy rain, snow, or strong winds.

In addition to regular cleaning, you can also protect your new sling from weather damage by following these tips:

  • Apply a waterproofing spray specifically designed for outdoor fabrics.
  • Avoid leaving the chair out in direct sunlight for extended periods of time as this can cause fading or discoloration.
  • If possible, bring the chairs indoors during winter months when they’re not in use.

By taking these simple steps, you can help extend the life of your new patio chair sling and keep it looking great for years to come!

Conclusion

Congratulations! You’ve successfully replaced the sling on your patio chair.

Your new sling not only looks great but also provides comfort and support for your outdoor relaxation time. Remember to choose a durable material that can withstand the elements and regular use.

To maintain the longevity of your new sling, regularly clean it with mild soap and water and avoid using abrasive cleaners or tools.

If you notice any signs of wear or damage, address them promptly to prevent further damage.

With proper care, your replacement sling can last for many years to come, providing you with comfortable outdoor seating whenever you need it.

Enjoy!

Related Posts